40
VS-1616D-MD - Using the Configuration Menus
5. Press TAKE to enter the parameters list.
A message similar to the following is displayed with the relevant port number
in place of 06:
IN: 06
SET: 36.Reset SubBoard
6. To select the next parameter press the right arrow button. (See the table at
the end of this section for available parameters.)
Or:
7. To enter the displayed parameter press TAKE.
The parameter options are displayed.
8. Select the required action or number using the keypad numbers and arrows.
9. Press TAKE to save the change.
Note
: The parameter change is not implemented until you press TAKE.
10. Repeat from Step 6 to modify other parameters
11. Do one of the following:
Press BREAKAWAY to exit the Config Menu
Wait approximately 15 seconds for the operation to time out
Press MENU to exit to the parameter list
The following tables list the input card types and their relevant parameters.
Note
: Not all options are displayed for every menu selection. Some parameters
depend on the specific selection of other parameters.
Note
: The volume control provides only attenuation, no gain. Hence, setting
volume to 100% provides no attenuation.