KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher
12
2. Using a 15-pin HD (male to male) cable
1
3. Using an audio cable with 3.5mm mini jacks at both ends
, connect the 15-pin HD connector
on the rear of the
SI-1VGA
to the corresponding input on the rear of the
VP-81KSi
.
2
4. Repeat steps 2 and 3 for each
SI-1VGA
remote step-in module.
, connect the
3.5mm mini connector on the rear of the
SI-1VGA
to the corresponding audio
input on the rear of the
VP-81KSi
.
Figure 7: Connecting the SI-1VGA
6.4 Connecting the AV ON CAT 5 Twisted Pair Output
You can connect the
VP-81KSi
to any compatible Kramer TP (Twisted Pair)
receiver, for example, TP-120 (no audio) or TP-122 (with audio).
For further details, refer to the relevant TP receiver user manual
3
6.5 Connecting to the VP-81KSi via the RS-232 Port
.
You can connect to the
VP-81KSi
via an RS-232 connection using, for example, a
PC.
To connect to the VP-81KSi via RS-232:
•
Connect the RS-232 9-pin D-sub rear panel port on the
VP-81KSi
unit via a
9-wire straight cable (pin 2 to pin 2, pin 3 to pin 3, pin 5 to pin 5) to the
RS-232 9-pin D-sub port on your PC
1 For example, Kramer C-GM/GM
2 For example, Kramer C-A35M/A35M
3 Available for download from
http://www.kramerelectronics.com
gpd.sunwayinfo.com.cn
