#
Feature
Function
14
N
av
igat
ion
B
u
tt
ons
Button// VOLUME
Button
Press to move to the previous level in the OSD screen. When not within the OSD menu, press to
decrease the Audio CH1 volume
Button // VOLUME
Button
Press to move to the next level in the OSD screen. When not within the OSD menu, increase the
Audio CH 1 volume
// VOLUME Button
Press to move down the menu list and to decrease numerical values. When in the transition mode
and not within the OSD menu mode, press to decrease the Audio CH 2 volume
// VOLUME Button
Press to move up the menu list values and to increase numerical values. When in the transition
mode and not within the OSD menu mode, press to increase the Audio CH 2 volume
ENTER Button
Press to enter sub-menu items, and save. When in the transition mode and not within the OSD
menu, performs as a TAKE button (to carry out a transition).
15
RESET TO XGA/720P
Button
Press to reset the video output resolution to XGA or 720p and change the deep color settings to Off
on the output. Press and hold for about 3 secs to toggle between reset to XGA and reset to 720p
16
PANEL LOCK Button
Press and hold for about 3 seconds to lock/unlock the front panel buttons
#
Feature
Function
17
HDMI IN Connectors
Connect to the HDMI source (from 1 to 4)
18
DVI-U IN Connectors
Connect to the video source that can be HDMI, VGA, Component or
Composite video (from 1 to 2)
19
HDBT IN Connectors
Connect to an HDBT Transmitter (for example, the Kramer
TP-580Txr
) to pass
audio and video signals as well as serial commands (from 1 to 2)
20
AUDIO Input
Unbalanced
Connectors
HDMI IN
3.5mm Mini Jack
Connect to an unbalanced audio source for HDMI 1 to HDMI 4 when using
analog audio instead of embedded audio
DVI-U IN
3.5mm Mini Jack
Connect to the unbalanced stereo audio of the DVI-U source (from 1 to 2)
HDBT IN
3.5mm Mini Jack
Connect to the unbalanced stereo audio source for HDBT1 to HDBT 2 when
using analog audio instead of embedded audio
21
MIC 1
6mm Jack
Connect to a microphone (see microphone pinout)
22
COND/DYN MIC
DIP-switch
Select between a condenser and a dynamic type microphone
23
MIC 2
6mm Jack
Connect to a microphone (see microphone pinout).
24
COND/DYN MIC
DIP-switch
Select between a condenser and a dynamic type microphone
25
AUDIO LINE OUT (L, R)
TBC
Connect to the L and R balanced stereo audio acceptor
26
SPKR OUT 4-pin Terminal Block
Connects to a pair of loudspeakers
27
S/PDIF OUT
RCA
Connector
Connect to a digital audio acceptor
28
REMOTE IR
3.5mm Mini Jack (opening)
Covered by a cap. The 3.5mm connector at the
end of the internal IR connection cable fits
through this opening
Connects to an external IR receiver unit for controlling the machine via an IR
remote controller (instead of using the front panel IR receiver), Optional. Can
be used instead of the front panel (built-in) IR receiver to remotely control the
machine (only if the internal IR connection cable has been installed)
29
Channel 1 output
connectors
HDBT OUT 1 RJ-45
Connect to an HDBT receiver (for example, Kramer
TP-580Rxr
) to pass audio
and video signals as well as serial commands
30
HDMI OUT 1
Connect to an HDMI acceptor
31
Channel 2 Output
Connectors
HDBT OUT 2 RJ-45
Connect to an HDBT receiver (for example, Kramer
TP-580Rxr
) to pass audio
and video signals as well as serial commands IR?
32
HDMI OUT 2
Connect to an HDMI acceptor
33
RS-232 DATA 9-pin D-sub Port
Connect to the PC or the remote controller and pass data between this RS-232
port and the serial matrix (see step 8 below)
34
RS-232 CONTROL 9-pin D-sub Port
Connect to the PC or the remote controller
35
USB PROG Connector
Connects to a USB drive to upgrade the firmware
36
ETHERNET Connector
Connects to the PC or other Controller through computer networking
37
Power Connector with Fuse
AC connector, enabling power supply to the unit
38
POWER
Switch
Switch for turning the unit on or off
