VP-734 - Connecting the VP-734
11
The PC 15-pin HD computer graphics video connector to a video acceptor
(for example, an analog display)
In the HDTV mode, the signal is outputted as a component video signal (YPbPr) and
goes out via three PINS: PIN 1 is Red or Pr, PIN 2 is Green or Y, PIN 3 is Blue or Pb. In
other modes, it is outputted as a VGA signal (RGBHV)
4. Connect the S/PDIF IN RCA connector to a digital audio source (for example,
a DVD player), not shown in
Figure 3
.
5. Connect the AUDIO LINE OUT Terminal Block connector to a balanced audio
acceptor and the S/PDIF OUT RCA connector to a digital audio acceptor.
6. Connect the SPKR OUT block connector to a pair of loudspeakers, by
connecting the left loudspeaker to the “L+” and the “L-” terminal block
connectors, and the right loudspeaker to the “R+” and the “R-” terminal block
connectors.
Do not Ground the loudspeakers
.
7. Connect the power cord.
We recommend that you use only the power cord that is supplied with this machine
8. If required, connect:
A PC via RS-232, see
Section
5.2
The ETHERNET port, see
Section
5.4
The USB connector, audio sources and acceptors, and power cord are
not shown in
Figure 3
.
Содержание VP-734
