KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring and Controlling the VP-725xl
26
8.1.6
The Setup Screen
Figure 14
and
Table 11
define the Setup screen.
Figure 14: Setup Screen
Table 11: Setup Screen Functions
Setting
Function
Selection/Range
Default
Save
Save a profile
From Profile 1 to Profile 8
Recall
Recall a profile
From Profile 1 to Profile 8
Slideshow
Set speed for slide show (see section
8.1.7
) Min, Low, Mid, Long, Max,
Off
Off
Frame Lock
Locks the vertical refresh rate of the output
to that of the input
1,2
On/Off
Off
Auto Image
Automatically adjust and align the picture
each time one of the UXGA inputs is
selected or if the UXGA input resolution has
changed
Manual, Auto
Manual
Switching
Mode
Select seamless switching (fade-through-
Black) or fast switching which is faster but
may cause glitches on the output (applies
only when switching between analog inputs)
Seamless, Fast
Seamless
Factory Reset Reset your
VP-725xl
to its preset default
settings
Confirm, Yes, No
Advanced
Setup
Open the advanced setups (see
Figure 15
)
Mode Set (see
Table 12
)
OSD (see
Table 13
)
Misc. (see
Table 14
)
Input (see
Table 15
)
Output (see
Table 16
)
1 Note that seamless switching is not possible when working in the Frame Lock mode unless all sources are frame
synchronized
2 In cases where the output resolution can support the vertical refresh rate of the input, the output refresh rate will change
according to the input refresh rate
