Configuring and Controlling the VP-725xl
25
25
8.1.5
The Geometry Screen
Figure 13
and
Table 9
define the Geometry screen, allowing the user
flexibility in positioning his projector relative to the screening surface.
Figure 13: Geometry Screen
Table 9: Geometry Screen Functions
Setting
Function
Selection/Range
Default
Application
Select the output application Keystone, Anyplace or Rotation
Keystone
Location
Select the location of the
display
Front, Ceiling, Rear or Rear ceiling Front
Horizontal Keystone Adjust the horizontal
keystone
1
-40 to 40
0
Vertical Keystone
Adjust the vertical keystone
2
-30 to 30
0
Diagonal Projection Move the location of each
corner of the display
separately
3
Top Left, Top Right, Bottom Left,
Bottom Right or Reset (to reset
diagonal projections settings)
Top Left
Pincushion/Barrel
Adjust the pincushion or
barrel appearance of the
screen
4
-20 to 20
0
Rotation
Rotate the display clockwise
or counterclockwise (in 1
°
increments)
-180 to 180
0
Reset all
Resets the geometry settings to their default values
Table 10
defines the settings available for each application:
Table 10: Available Settings for Each Application
Application Available Settings
Keystone
Location, horizontal keystone, vertical keystone, pincushion/barrel and Reset all
Anyplace
Location, Diagonal Projection and Reset all
Rotation
Location, pincushion/barrel, Rotation and Reset all
1 If the projector is located at an angle to the left or right of the screen
2 If the projector is located at an angle above or below the screen
3 Horizontally and vertically
4 For projection onto curved surfaces
