Kramer VP-553, Руководство пользователя

Страница: 40 / 81

VP-553 - Using the Embedded Web Pages 35
35
7.2.1 Setting the IR Transmission Route
IR can be routed from any of the HDBT ports to one or more of the other HDBT
ports.
For example, Output 1, when used with its HDBT connector (not the HDMI) can be
used as an IR output as well, defining the IR input via the drop down menu.
Figure 25 shows the IR signal route when setting HDBT 1 (IR OUT) to HDBT 2.
In this example, an External IR Sensor is connected to the IR connector of the
TP-580T (connected to HDBT 2) and an IR Emitter is connected between the
TP-580T (connected to HDBT 1) and a DVD player. The DVD remote control sends
a command while pointing towards the External IR Sensor. The IR signal passes
through the TP cables, the VP-553 and the IR Emitter to the DVD player, which
responds to the command sent. At the same time you can also set HDBT 3 to
HDBT 1, thus sending IR commands from HDBT also to HDBT 3 (see blue line in
Figure 25) . This will work only if the devices are set appropriately.
Figure 25: HDBT IR transmission Example