Kramer VP-553, Руководство пользователя

Страница: 13 / 81

Figure 1: VP-553 Presentation Switcher/Scaler Front Panel
# Feature Function
1 IR Receiver Receives signals from the remote control transmitter
2 OSD OUT LEDs Red LEDS indicate whether the OSD is displayed on OUT 1 and/or OUT 2
3
In
p
u
t
S
e
lect
o
r
B
u
tt
o
n
s
TO USB OUT Press a button to switch a USB input to the output (from USB 1 to USB 4)
4 TO OUT 2 Press a button to switch an input to the OUT 2 output (HDMI inputs from 1 to 3 and HDBT inputs from 1 to 3)
5 TO OUT 1 Press a button to switch an input to the OUT 1 output (HDMI inputs from 1 to 3, HDBT inputs from 1 to 3, PC inputs from 1 to 2, TP
inputs from 1 to 2 and CV inputs from 1 to 2)
6 BLANK Buttons
Press to toggle between a blank screen and the display on OUT 1 and OUT 2 separately; can be programmed to follow MUTE (see
Section
6.2.5
)
7 MUTE Buttons Press to toggle between muting (blocking out the sound) and enabling the embedded audio output for OUT 1 and OUT 2 separately
Note that the mute button will not affect the LINE and MONITOR outputs
8 FREEZE Buttons Press to freeze/unfreeze the output video image on OUT 1 and OUT 2 separately; can be programmed to follow MUTE (see Section
6.2.5
)
9 MENU Button Displays the OSD menu (see Section
6.2
)
10 ENTER Button Press to accept changes and change the SETUP parameters (see Section
6.2
)
11 Navigation
Buttons

/- Button Press to decrease numerical values or select from several definitions
When not within the OSD menu mode, press to reduce volume (for embedded HDMI inputs, this does not affect the embedded output)
12

Button Press to move up the menu list values (see Section
6.2
)
13

Button Press to move down the menu list (see Section
6.2
)
14

/+ Button Press to increase numerical values or select from several definitions
When not within the OSD menu mode, press to increase volume (for embedded HDMI inputs, this does not affect the embedded output)
15
RESET TO XGA/720p
Button
Press to reset the video resolution of both scalers to XGA or 720p
Press and hold for about 2 seconds to reset to XGA; or press and hold for about 5 seconds to reset to 720p
16 OSD SELECT Button Click to select the output on which the OSD will be displayed (on both outputs, on output 1, output 2 or none)
8
VP
-5
5
3
–
Ov
e
rv
ie
w