Kramer VP-553, Руководство пользователя

Страница: 17 / 81

12 VP-553 - Connecting the VP-553
5 Connecting the VP-553
Always switch off the power to each device before connecting it to
your
VP-553 . After connecting your VP-553 , connect its power and
then switch on the power to each device.
You do not have to connect all the inputs and outputs, connect only
those that are required.
To connect the VP-553 , as illustrated in the example in Figure 3 , do the following:
1. Connect an HDMI source (for example, a DVD player) to the HDMI VIDEO
INPUT connector (from 1 to 3).
Alternatively, you can connect the DVI connector on the DVD player to the HDMI
connector on the VP-553 via a DVI-HDMI adapter. When using this adapter, you can
connect the audio signal via the terminal block connector
2. Connect a computer graphics source to the PC 1 15-pin HD VIDEO INPUT
connector (from 1 to 2).
3. Connect a composite video source (for example, a composite video player)
to the CV VIDEO INPUT RCA connector (from 1 to 2).
4. Connect a TP transmitter (for example, TP-121xl ) to the RJ-45 TP IN
connectors (from 1 to 2).
5. Connect an HDBT transmitter (for example, TP-580T ) to the RJ-45 TP IN
connectors (from 1 to 3).
6. Connect the USB IN ports (from 1 to 4) (for example, a PC) and USB OUT
port (for example, a smart whiteboard).
7. Connect the audio inputs (not shown in Figure 3 ) to the:

HDMI audio input 3.5mm mini jacks (from 1 to 3)

PC audio input 3.5mm mini jacks (from 1 to 2)

CV audio inputs to the L and R RCA connectors (from 1 to 2)
!
i