Connecting the VP-503xl/VP-504xl
7
5 Connecting the VP-503xl/VP-504xl
This section describes how to connect the:
VP-503xl
UXGA Scan Converter
(see section 5.1)
VP-504xl
UXGA/HD Scan Converter
(see section 5.2)
5.1 Connecting your VP-503xl UXGA Scan Converter
To connect your
VP-503xl
as the example in Figure 5 illustrates, do the
following
1
:
1. Connect a computer graphics source to the HD15F INPUT connector.
2. Connect the Y/C OUT 4p connector to the Y/C acceptor (for example, an
s-Video recorder) and/or the CV OUT BNC connector to the CV acceptor
(for example, a composite video recorder).
3. If required, connect a PC or controller to the RS-232 port (see section 5.3).
4. Set the dipswitches (see section 6.4.1).
5. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 5).
Adjust the Scan Converter features if required (see section 6.3).
1 Switch OFF the power on each device before connecting it to your VP-503xl. After powering up your VP-503xl, switch on
the power on each device. The VP-504xl connection is similar to that of the VP-503xl
