VP-480 - Operating the VP-480 CV to 3G HD-SDI Scaler
9
To change settings
:
1. From normal operation, press MENU.
The OSD main menu appears on the screen.
2. Press the
+
or
–
button to move up or down the list or highlight the main
menu item in green.
3. Press Enter.
If the menu item has a parameter after it, the parameter changes to red and
the
+
and
–
buttons are used to cycle through the available parameters.
If there is no parameter after the menu item, a submenu appears.
4. Press ENTER to set the value.
5. Press the
+
or
–
button to move up or down the list and highlight the
submenu item in green.
6. Press ENTER.
The submenu parameter changes to red.
7. Press the
+
or
–
button to increase or decrease the value of the parameter.
8. Press ENTER to set the value.
9. To return to the main menu, select EXIT and press ENTER.
10. To return to normal operation, select EXIT from the main menu and press
ENTER.
To exit from the OSD at any point, press the MENU button. Unsaved values return
to their previous value.
Содержание VP-480
Страница 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL VP 480 CV to 3G HD SDI Scaler P N 2900 000762 Rev 3 ...
Страница 2: ......
Страница 16: ......