VP-440H2
Quick Start
P/N: 2 9 0 0 - 3 0 0 9 3 0 QS
Rev: 4
Scan for full manual
VP-440H2 Quick Start Guide
This guide helps you install and use your
VP-440H2
for the first time.
Go to
www.kramerav.com/downloads/VP-440H2
to download the latest user manual and
check if firmware upgrades are available.
Step 1: Check w
hat’s in the box
VP-440H2 4K Presentation Switcher / Scaler
1 Power cord
4 Rubber feet
1 Power supply (48V DC)
1 Quick start guide
Step 2: Get to know your VP-440H2
#
Feature
Function
1
48 V (
) Slide Switch
Slide up (48V) to select a condenser type microphone; slide down to select a dynamic
type microphone (we recommend that you slide down if a microphone is not connected to
the
VP-440H2
).
2
MIC 6.3mm Jack
Connect to the microphone source.
3
Input Selector
Buttons
HDBT IN
Press to select the HDBT input.
4
HDMI IN
Press to select the HDMI input (from 1 to 3).
5
PC IN
Press to select the computer graphics input.
6
MENU Button
Displays the OSD menu.
7
Navigation
Buttons
Press to decrease numerical values or select from several definitions.
When not in the OSD menu, press to reduce the output volume.
Press to move up the menu list values.
Press to increase numerical values or select from several definitions.
When not in the OSD menu, press to increase the output volume.
Press to move down the menu list.
ENTER
Press to accept changes and change the SETUP parameters.
8
RESET TO XGA/1080p Button
Press and hold for about 5 seconds to toggle the output resolution between XGA and
1080p, alternatively.
9
PANEL LOCK Button
Press and hold for about 5 seconds to lock/unlock the front panel buttons.