6
VP-435 - Connecting the VP-435
4
Connecting the VP-435
Always switch off the power to each device before connecting it to your
VP-435
. After connecting your
VP-435
, connect its power and then
switch on the power to each device.
To connect your
VP-435
, as illustrated in the example in
Figure 2
, do the following:
You do not have to connect all the inputs, connect only those that are required.
1. Connect a component video source (for example, a DVD player) to the
COMP In Y, Pb, Pr, RCA connectors, and to the COMP In L and R audio
RCA connectors.
2. Connect a computer graphics source to the UXGA In 15-pin HD connector,
and to the UXGA In audio 3.5mm mini jack connector.
3. Connect an HDMI source (for example, a DVD player) to the HDMI In
connector, and to the HDMI In analog audio
3.5mm mini jack connector
.
Alternatively, you can connect the DVI connector on the DVD player to the HDMI
connector on the VP-435 via a DVI-HDMI adapter.
4. Connect the HDMI Out connector to an HDMI acceptor (for example, a
plasma display).
5. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in
Figure 2
).
i
Содержание VP-435
Страница 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL VP 435 Component UXGA HDMI Scaler P N 2900 000262 Rev 13...
Страница 2: ......
Страница 11: ...8 VP 435 Connecting the VP 435 Figure 3 Connecting the Contact Closure Remote Control PINs...
Страница 17: ......