KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the Scalers
8
5 Connecting the Scalers
The following sections describe how to connect each unit.
5.1 Connecting the VP-413xl
To connect the
VP-413xl
, as illustrated in the example in Figure 5, do the
following
1
:
1. Connect a composite video source to the CV IN RCA connector (for example,
a composite video player) and/or an s-Video source (for example, an s-Video
player) to the Y/C 4p input connector.
2. Connect the VGA – WUXGA OUT 15-pin HD computer graphics video
connector to an acceptor (for example, a plasma display).
3. Connect the 5V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 5).
4. Use the:
INPUT SELECT button to select the desired input
OUTPUT RES. button to select the desired resolution
Figure 5: Connecting the VP-413xl
1 Switch OFF the power on each device before connecting it to your VP-413xl. After connecting your VP-413xl, switch on its
power and then switch on the power on each device