Connecting the Scalers
9
5.2 Connecting the VP-414xl
To connect the
VP-414xl
, as illustrated in the example in Figure 6, do the
following
1
:
1. Connect a composite video source to the CV IN RCA connector (for example,
a composite video player) and/or an s-Video source (for example, an s-Video
player) to the Y/C 4p input connector.
2. Connect the WUXGA / HD OUT 15-pin HD computer graphics video
connector to an acceptor (for example, a plasma display).
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not shown in Figure 6).
4. If required, connect
2
the contact closure remote control PINS (see section 5.3).
5. Use the:
INPUT SELECT button to select the desired input
3
OUTPUT RES. button to select the desired resolution
4
Figure 6: Connecting the VP-414xl
1 Switch OFF the power on each device before connecting it to your VP-414xl. After connecting your VP-414xl, switch on its
power and then switch on the power on each device
2 The connection is not illustrated in Figure 6
3 The VP-414xl includes an HD LED, which illuminates when HD resolutions are selected (item 10 in Table 4)
4 Note that the HD resolutions are in YUV colorspace