Kramer VP-214DS, Руководство пользователя

Страница: 7 / 36

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-214DS 4 Channel Automatic XGA Switcher
4
Table 1: Front Panel VP-214DS 4 Channel Automatic XGA Switcher Features
# Feature Function
1 POWER Switch Illuminated switch supplying power to the unit
2 IN 1 Button Press to select input 1 as the Master Source signal (see section 7.1):
The red LED illuminates when IN 1 is the Master Source and the signal
on the input is inactive
The blue LED illuminates when IN 1 is not the Master Source and the
signal on the input is active
Both the blue and red LEDs illuminate (creating purple) when IN 1 is the
Master Source and the signal on the input is active
Button is not illuminated when IN 1 is not the Master Signal and the
signal is inactive
3
M
A
N
U
A
L
S
E
LE
C
T
O
R
C
H
A
N
N
E
L
A
1
IN 2 Button Press to select input 2 as the Master Source signal (see section 7.1):
The red LED illuminates when IN 2 is the Master Source and the signal
on the input is inactive
The blue LED illuminates when IN 2 is not the Master Source and the
signal on the input is active
Both the blue and red LEDs illuminate (creating purple) when IN 2 is the
Master Source and the signal on the input is active
Button is not illuminated when IN 2 is not the Master Signal and the
signal is inactive
4 PANEL LOCK Button Press to lock/unlock the front panel to prevent unintentional operation
Table 2: Rear Panel VP-214DS 4 Channel Automatic XGA Switcher Features
# Feature Function
5 HD15 F IN 1 Connector Connects to the IN 1 XGA source
6 HD15 F IN 2 Connector Connects to the IN 2 XGA source
7 HD15 F LOOP Connector Connects to a monitor looped to IN1
8 TERM Button
Release to terminate IN 1 with 75 when connecting a monitor
to the LOOP connector
9
C
H
A
N
N
E
L
A
1
HD15 F OUT Connector Connects to the output XGA acceptor
10 ETHERNET Connector Connects to the PC or other controller through computer
networking
11 PROG Button Push in to program for upgrading to the latest Kramer firmware
(see section 8.2), or release for Normal (the factory default)
12 RS-485 Connector Use for bi-directional communication with another unit
13 Setup Dipswitches Set for machine setup (see section 6.5)
14 REMOTE Terminal Block Connects to a dry contact switch (see section 7.2)
15 RS-232 DB 9F Connector Connects to the PC or other Serial Controller
16 Power Connector with Fuse AC connector enabling power supply to the unit
1 For each of the four channels: A, B, C and D
im Vertrieb von CAMBOARD Electronics
www.camboard.de Tel. 07131 911201
Fax 07131 911203 ce-info@camboard.de