KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-214DS 4 Channel Automatic XGA Switcher
2
both inputs, by default, the master source signal is selected
1
.
In addition, the
VP-214DS
:
Has a video bandwidth of 300MHz, to ensure transparent operation at the
highest resolutions
Includes 4 automatic 2x1 switchers
Features automatic input signal detection
Includes ID BIT control
2
for each channel
Includes a looping XGA input with a loop termination switch
Includes remote control contact closure
Has a PANEL LOCK button for locking the front panel to prevent
unintentional operation
Control the
VP-214DS
using the front panel buttons, or remotely via:
RS-485 or RS-232 serial commands transmitted by a touch screen system,
PC, or other serial controller
Ethernet
Remote control contact closure
The
VP-214DS
is dependable, rugged and fits into one vertical space (1U) of
a standard 19" rack.
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise-
levels (often associated with low quality cables)
Avoid interference from neighboring electrical appliances and position
your Kramer
VP-214DS
away from moisture, excessive sunlight and dust
4 Your VP-214DS 4 Channel Automatic XGA Switcher
Figure 1 illustrates the front and rear panels of the
VP-214DS
. Table 1 and
Table 2 define the front and rear panels of the
VP-214DS
, respectively.
1 You can select the master source signal via front panel buttons (IN 1 or IN 2 for each channel), or remotely via PC
2 Sometimes notebook computers refuse to output a XGA signal to an external XGA monitor. By setting the ID BIT to ON,
the notebook will output to an external XGA monitor
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
