KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your VP-12N 1:12 + 3 UXGA / CAT5 Distributor
2
In particular, the
VP-12N
Features a switch on the underside for ID Bit control
Features three trimmers on the underside for red, green, and blue control
Has video bandwidth that exceeds 300MHz, ensuring that it remains
transparent even at high-resolution UXGA modes
Can power the receiver over the same CAT5 cable
Is mains fed and is housed in a 19" enclosure
To achieve the best performance:
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise levels
(often associated with low quality cables)
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer
VP-12N
away
from moisture, excessive sunlight and dust
In applications with high interference, shielded twisted pair (STP) cable will
give better results.
4 Your VP-12N 1:12 + 3 UXGA / CAT5 Distributor
This section defines the
VP-12N
1:12 + 3 UXGA / CAT5 Distributor
:
Front and rear panels (see Figure 1 and Table 1)
Underside panel (see Figure 2 and Table 2)