Kramer VM-8HN, Руководство пользователя

Страница: 17 / 22

14 VM-8HN - Protocol 3000
Command - HDCP-STAT Command Type - System
Command Name Permission Transparency
Set: - - -
Get: HDCP-STAT? End User Public
Description Syntax
Set: - -
Get: Get HDCP signal status
# HDCP-STAT?
␠
stage,stage_id
␍
Response
Set / Get: ~ nn@ HDCP-STAT
␠
stage,stage_id,mode
␍␊
Parameters
stage
–
input/output (see Section
6.5 Stage
)
stage_id - number of chosen stage (1.. max number of inputs/outputs)
actual_status - signal encryption status - valid values ON/OFF (see Section
6.6 HDCP Types
)
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was received
Response is sent to all com ports after execution if HDCP-STAT was set by any other external control
device (button press, device menu and similar) or HDCP mode changed
Notes
On output
– sink status
On input
– signal status
Command - RESET Command Type - System-mandatory
Command Name Permission Transparency
Set: RESET Administrator Public
Get: - - -
Description Syntax
Set: Reset device
# RESET
␍
Get: - -
Response
~nn@ RESET
␠
OK
␍␊
Parameters
Response Triggers
Notes
To avoid locking the port due to a USB bug in Windows, disconnect USB connections immediately after
running this command. If the port was locked, disconnect and reconnect the cable to reopen the port.