10
VM-8HN - Connecting the VM-8HN
Figure 3: Connecting the VM-8HN
1:8+2 HDMI Looping DA
5.1
Acquiring an EDID
To acquire an EDID, press the EDID SELECT button as follows:
1. The first press of the EDID SELECT button displays the present EDID status
similar to that shown in the next step.
2. The second press of EDID SELECT enters the read mode and each
additional press cycles through the source options:
OUT 1 -> OUT 2 -> OUT 3 -> OUT 4 -> OUT 5 -> OUT 6 -> OUT 7 -> OUT 8
-> LOOP 1 -> LOOP 2, all LEDS flash slowly for a default EDID.
3. When the desired EDID source is reached, press the EDID READ button.
The
VM-8HN
reads the EDID for a few seconds. When finished, all LEDS
return to display the present output connection status.
If an unconnected output is chosen or the EDID cannot be read, the
VM-8HN
loads the
default EDID.
Note
: After reading an EDID, there is an interruption on the video outputs while syncing
with the monitors.
