Kramer VM-8HN, Руководство пользователя

Страница: 14 / 22

VM-8HN - Connecting the VM-8HN 11
5.2 Setting the DIP-Switches
The eight DIP-switches located on the back panel are used for video wall, 5V DC,
MAC settings and force RGB.
The DIP-switch status is sampled when the device is reset. The unit must be
powered off and on for the new settings to activate.
DIPs 1 and 2 - Video Wall Delay
DIP 1 DIP 2 Video Wall Delay
up up Video wall off
–
0 delay
down up On
– 10 sec delay
up down On
– 15 sec delay
down down On
– 17 sec delay
DIPs 3 and 4 - Output 5V Off Delay
DIP 3 DIP 4 Output 5V Off Delay
up up 15 mins
up down 1 min
down up 15 sec
down down 5 sec
DIP 5
– MAC Mode
DIP 5 MAC Mode
up MAC on
down MAC off
Note : MAC mode does not support HDCP.
DIP 6
– Force RGB
DIP 6 Force RGB
up Use monitor EDID
down Use monitor EDID and force
RGB support
Note : After setting force RGB, you must reset the device.
DIPs 7
– Reserved for future use
DIP 8
– Firmware Update
DIP 8 FW Update
up Normal operation
down Update firmware