![background image](http://html.mh-extra.com/html/kramer/vm-4dvi-r/vm-4dvi-r_user-manual_2002135009.webp)
Connecting a VM-4DVI-R 1:4 DVI Distributor
7
6 Connecting a VM-4DVI-R 1:4 DVI Distributor
To connect the
VM-4DVI-R
as a 1:4 DVI distributor, do the following:
1. Connect a DVI source (for example, a computer) to the INPUT connector.
2. Connect the 4 OUTPUT connectors
1
to up to 4 DVI acceptors, as follows:
OUTPUT 1 connector to DVI acceptor 1 (for example, a projector)
OUTPUT 2 connector to DVI acceptor 2 (for example, a display)
OUTPUT 3 connector to DVI acceptor 3 (for example, a display)
OUTPUT 4 connector to DVI acceptor 4 (for example, a display)
3. Connect the power cord to the mains electricity.
4. Turn ON the POWER.
5. Acquire EDID (see section 6.1).
Projector
Display
Display
Display
Figure 2: Connecting a VM-4DVI-R 1:4 DVI Distributor
1 As required. Up to 4 outputs can be connected on the VM-4DVI-R. Not all outputs need to be connected