KRAMER: SIMPLE CREATIVE TECHNOLOGY
Technical Specifications
8
6.1 Acquiring EDID
The
VM-4DVI-R
initially operates with the default EDID. This means that
you can turn ON the power before connecting any of the acceptors.
To select an EDID, do the following:
1. Switch on the device.
2. Press the SELECT button to select the output from which you want to read the
EDID information.
To restore the default EDID information, select an output to which an
acceptor is not connected.
3. While the selected output LED blinks, press the READ button.
The output LEDs no longer blink.
4. Switch the unit OFF and after few seconds switch it ON again.
Wait until the output LEDs no longer blink.
Note
: If the stored EDID information is different from the EDID
information on the output selected in step 2, the READ button blinks
1
.
5. Press the READ button.
The blinking stops and after few seconds the READ button no longer
illuminates.
7 Technical Specifications
Table 3 includes the technical specifications:
Table 3: Technical Specifications
2
of the VM-4DVI-R 1:4 DVI Distributor
INPUT:
1 DVI, 1.2Vpp on a DVI Molex 24pin female connector; DDC signal 5Vpp (TTL)
OUTPUTS:
4 DVI, 1.2Vpp on DVI Molex 24pin female connectors; DDC signal 5Vpp (TTL)
BANDWIDTH:
1.65Gb/s
CONTROLS:
SELECT and READ buttons for selecting and storing EDID information
POWER SOURCE:
10 Watts (maximum) 220V
DIMENSIONS:
19-inch (W), 7-inch (D), 1U (H)
WEIGHT:
2.5 kg. (5.5 lbs.) approx.
ACCESSORIES:
Power cord
1 If it is not blinking, this indicates that the stored EDID information is identical to that of the output and there is no need to
acquire the EDID
2 Specifications are subject to change without notice
