Using the Embedded Web Pages
The
VM-212DT
can be operated remotely using the embedded web
pages. Access the web pages from the control computer using a web
browser and an Ethernet connection.
Before attempting to connect:
Ensure that your browser is supported.
Ensure that JavaScript is enabled.
Note
: In the event that a Web page does not update correctly, clear
your Web browser’s cache.
To browse the VM-212DT web pages:
1. Open your Internet browser.
2. Type the IP number of the device (default = 192.168.1.39) in
your browser.
If authentication is enabled, the Authentication Required window
appears.
3. Enter the valid username and password to access the web
pages (default = User Name: Admin; Password: Admin).
The Web Cache message appears.
4. Click
OK
.
The Switching page appears
#
Item
Description
1
Page Selection Panel
Click one of the buttons to select a page.
2
Page Selection Panel Hide/Reveal Button
Click the arrow to open or close the page selection panel.
3
Switching
Selection
Click one of the buttons to select an input.
4
Mute Button
Click to mute/unmute the audio.
5
Analog Output Volume
Control
Click and drag the slider to control the audio volume.
6
Security Indicator
Indicates whether security is enabled (locked) or disabled (unlocked).
7
Full Screen Button
Click to maximize the page.
Step 7: Setting the DIP Switches
Set the DIP-switches using the table on
the right. The ON/OFF positions are as
follows:
Switch down = ON
Switch up = OFF
#
Feature
Switch State
1
IR modulation selection Off
—Disable IR
On
—Enable IR modulation
2
Extra range
Off
—Disable extra range
On
—Enable extra range
3
Compressed audio/
Audio de-embedding
Off
—De-embed audio
On
—Enable compressed audio
4
Reserved
