Quick Start Guide
Battery Simulator
Step 1-A: Plug in the AC power cord (not shown)
Step 1-B: Turn on the TS200 by press the
LINE button
Step 1-C: Enable the output by press the
ON/OFF button
Step 2: Turn the OFFSET knob to set the simulated battery voltage (e.g. 3.8V)
BA
TT
ER
Y
CH
AR
GE
R
1.01
A
Optional DMM for
Measure Current
Step 3: Connect the battery charger to the TS200 OUTPUT
Vary the voltage to observe
the charging current
Accel Instruments
www.accelinstruments.com
