Technical
Manual
RMB-1077
Table of Contents
Specification
Specification.....................................1
Parts List ..........................................2~5
Destination Setting...........................6
PCB Assembly .................................8
Schematic Diagram..........................9
Power Configurations (FTC)
7 x 100 watts/ch into 8 ohms
Watts/Channel
100 watts, all channel driven, with 20KHz filter,
8 ohm load, 20-20kHz, 0.03% THD
Total Harmonic Distortion(20-20kHz, 8 ohms)
< 0.03 %
200 watts
Intermodulation Distortion(60Hz : 7kHz, 4:1)
< 0.03 %
Frequency Response
10 Hz - 80 KHz ( 3dB)
Dampning Factor(8 ohms)
400
27.4 dB
Signal to Noise Ratio(IHF A network)
105 dB
Input Sensitivity / Impedance
1.2 volts / 8.3 k ohms
Power Requirement
120 volts 60 Hz
230 volts 50 Hz
Power Consumption
400 watts
Panel Height
432 x 72 x 415 mm
17
1/8
x 2
7/8
3/8
3/8
x 16 inches
inches
Dimensions (W x H x D)
60 mm, 2
Weight (net)
7.8 kg, 17.2 Lb.
10-10 SHINSEN-CHO , SHIBUYA-KU,
TOKYO 150-0045, JAPAN
Serial. NO.
®
Quality Uncompromised
Y-385A-0510/pdf
SEVEN CHANNEL POWER AMPLIFIER
Power Output (4 Ohms, 0.09%, THD)
Amp Gain
USA
Europe
70 watts - Idling
3 watts - Standby
Wiring Diagram ...............................7
