OWNER’S MANUAL
2
•
DANGER: RISK OF ELECTRIC SHOCK, DO NOT
OPEN
•
ATTENTION: RISQUE DE CHOC
ELECTRIQUE!
•
NE PAS OUVIRIR!
•
ACHTUNG: STROMSHLAG GEFÄHRDUNG,
NICHT AUFMACHEN!
CAUTION:
To reduce the risk of electric shock, do not
remove cover or open rear panel. No user serviceable parts
inside: refer handling to qualified personnel.
WARNING:
To reduce the risk of fire or electric shock, do not
expose this amplifier to rain or moisture.
Before using your amp.
Before operating Amelia please make sure of the following:
•
First, connect the amp head to a speaker cabinet or other
suitable load. Never run the amp without a load connected to
the output.
•
Connect the power cable into the back panel and then to a
power outlet.
•
With the amp in the standby position, switch the power to
ON and wait about 30 seconds for the tubes to warm up.
•
Change the standby switch to ON.
•
You’re ready to go.
WARNING: If a speaker or suitable “dummy load” is not connected to
the speaker output, output transformer failure is very possible.
