VIA Collage - Configuring VIA Collage
73
73
It is also possible to setup your VIA Collage in Dual network mode by selecting the
Enable Dual Network
check box. For more details about how to properly configure
this feature, go to:
www.kramerav.com/product/VIA%20Collage#Tab_Resources
).
If you do not require connecting your VIA devices to 2 different networks, make
sure to disable the VIA dual network feature and deactivate or unplug the unneeded
RJ-45 cable to avoid unwanted communication from this socket.
To change the IP address:
1. In the LAN Settings tab of the Settings window (
Figure 61
), type the IP
address, subnet mask, default gateway, and DNS server.
2. Click
Apply Settings
and click
OK
in the confirmation message.
3. Click
Reboot.
VIA Collage
restarts with the new settings.
7.1.2
System Control Settings
To configure system click the System Controls tab of the VIA Settings window.
Figure 54: System Control Screen
VIA Collage is pre-activated by Kramer. If your unit needs to be re-activated,
contact Kramer Technical Support.
Содержание VIA Collage
