Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
VCO-1
/
VCO-5UHD
/
VCO-8
/
VCO-16
. For best results, we
recommend that you always use Kramer high-performance cables to connect AV equipment to
VCO-1
/
VCO-5UHD
/
VCO-8
/
VCO-16
.
Connecting VCO-1
Connecting VCO-5UHD
LOOP is switched to ON to define OUTPUT 1 as a video pass-through channel (looping the input to an additional VCO device).
Connecting VCO-8 and VCO-16
Note that
VCO-8
and
VCO-16
are identical, except for the number of outputs: 8 for
VCO-8
and 16 for
VCO-16
.
Step 5: Connect the power
Connect the 5V DC power adapter (to
VCO-1
,
VCO-5UHD
) or connect the power cord (to
VCO-8
,
VCO-16
), and plug it into the
mains electricity.
Safety Instructions (for all the devices, unless otherwise specified)
Caution:
There are no operator serviceable parts inside the unit.
Warning:
Use only the power cord that is supplied with the unit (
VCO-8
,
VCO-16
).
Use only the Kramer Electronics power supply that is provided with the unit (
VCO-1
,
VCO-5UHD
).
Warning:
Do not open the unit. High voltages can cause electrical shock! Servicing by qualified personnel only (
VCO-8
,
VCO-16
).
Warning:
Disconnect the power and unplug the unit from the wall before installing.
See
for updated safety information.
