KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating via the VA-2002 Front Panel
26
Note that if the logo is already stored in the non-volatile memory of the
VA-2002
, a message will appear
1
offering to let you replace it.
If the logo is On (and the INSERT button illuminates) a message will appear
2
prompting you to turn the logo Off (by pressing the INSERT button).
10.2.2.2 Deleting a Logo from the Main Menu
To delete a logo:
1. Press the OK button or the ESC button.
The Main Menu appears, as Figure 27 illustrates.
2. Press the DOWN button.
The Main Menu Edit logo screen appears, as Figure 29 illustrates:
3. Press the OK button.
The Edit Load logo screen appears, as Figure 30 illustrates:
4. Press the DOWN button twice.
The Edit Delete logo screen appears.
5. Press the OK button and select the logo for deletion using the UP and DOWN
buttons.
6. Press the OK button and confirm the deletion (choosing Yes) using the UP
and DOWN buttons.
The logo is deleted.
10.2.2.3 Deleting all the Logos from the Main Menu
To delete all the logos simultaneously:
1. Follow steps 1 to 3, as outlined in section 10.2.2.2.
2. Press the DOWN button 3 times.
The Edit Delete all logos screen appears.
3. Press the OK button and confirm the deletion (choosing Yes) using the UP
and DOWN buttons.
All the logos are deleted.
10.2.2.4 Reviewing Information about the Logo from the Main Menu
To review information about the size and memory of the logo:
1. Follow steps 1 to 3 as outlined in section 10.2.2.2.
2. Press the DOWN button.
The Edit Info screen appears.
1 As follows: “Logo exists! Replace? Yes or No”
2 As follows: “Please switch off the logo to continue”
