KRAMER: SIMPLE CREATIVE TECHNOLOGY
Your TP-310A UXGA Line Receiver/DA
6
Table 1: TP-310A UXGA Line Receiver/DA Features
#
Feature
Function
1
POWER
Switch
Illuminated switch for turning the unit ON or OFF
2
LINK
LED
Lights when receiving a valid input signal
3
EQ.
1
Adjusts
Trimmer
2
the cable compensation (equalization) level for the
UXGA outputs
4
LEVEL
Trimmer
Adjusts
2
5
the output signal level for the UXGA outputs
LINE IN
RJ-45
Connector
Connect to the
LINE OUT
connector of a transmitter
3
6
UXGA OUT 2
HD15F
Connector
Connect to the video acceptor 2
7
UXGA OUT 1
HD15F Connector
Connect to the video acceptor 1
8
LINE OUTPUT
RJ-45
Connectors Connect to
4
the LINE IN RJ-45
connector on a receiver
5
9
(from 1
to 10)
Audio OUT
3.5mm Mini Jacks
ANALOG 1
Connect to the stereo analog audio acceptor 1
10
ANALOG 2
Connect to the stereo analog audio acceptor 2
11
Audio OUT
RCA
Connectors
S/PDIF 1
Connect to the digital audio acceptor 1
12
S/PDIF 2
Connect to the digital audio acceptor 2
13
RS-232
Terminal
Block Connector
G, Tx1
Connect the two connectors (G and Tx1) to control a device (see
section
6.3
)
G, Tx2
Connect the two connectors (G and Tx2) to control a device (see
section
6.3
)
14 Power Connector with
Fuse
AC connector enabling power supply to the unit
4.1 The TP-310A UXGA Line Receiver/DA Underside
Figure 2
and
Table 2
define the underside of the
TP-310A
Figure 2: TP-310A Underside
Table 2: Features of the TP-310A Underside
Feature
Function
VS
Switch
6
Slide the switch down, to set the V SYNC to
positive polarity (POSITIVE)
Slide the switch up, to set the V SYNC to
negative polarity (NEGATIVE)
HS
Switch
6
Slide the switch down, to set the H SYNC to
positive polarity (POSITIVE)
Slide the switch up, to set the H SYNC to
negative polarity (NEGATIVE)
1 Degradation and VGA/XGA signal loss can result from using long cables (due to the effects of stray capacitance, for
example), sometimes leading to a loss of sharpness in high-resolution signals
2 Use a screwdriver to carefully rotate the trimmer, adjusting the appropriate level
3 The PINOUT is defined in
Table 3
and
Figure 5
4 Using a Kramer's skew-free CAT 5 cable BC-SXTP, for example, with RJ-45 connectors at both ends (the PINOUT is
defined in
Table 3
and
Figure 5
)
5 For example, the Kramer TP-124 or TP-46
6 By default, both switches are set to POSITIVE
