Configuring the TP-310A UXGA Line Receiver/DA
11
11
6.2 Connecting Additional TP-310A UXGA Line Receiver/DA Units
You can connect several
TP-310A
units via the LINE OUTPUT RJ-45
connectors on the first unit. The number of
TP-310A
units that can be
connected depends upon the quality of the input signal that you require and
the distance between the machines. We do not recommend cascading more
than five
TP-310A
units.
In the example illustrated in
Figure 4
, a
TP-310A
unit is connected to three
additional
TP-310A
units via the LINE OUTPUT RJ-45 connectors. Each
of the three connected
TP-310A
units can distribute the signal to 10
receivers. The system, in total, distributes the signal to 37 receivers.
To connect an expanded UXGA Line Receiver/DA system, do the
following:
1. Connect a transmitter to the LINE IN RJ-45 connector of the first
TP-310A
.
2. Connect the LINE OUTPUT 1 RJ-45 connector of the first
TP-310A
to the
LINE IN RJ-45 connector of the second
TP-310A
.
3. Connect the LINE OUTPUT 2 RJ-45 connector of the first
TP-310A
to the
LINE IN RJ-45 connector of the third
TP-310A
.
4. Connect the LINE OUTPUT 3 RJ-45 connector of the first
TP-310A
to the
LINE IN RJ-45 connector of the fourth
TP-310A
.
5. Connect the LINE OUTPUT RJ-45 connectors of each
TP-310A
unit, to
the LINE IN RJ-45 connectors of the appropriate receivers, as illustrated in
Figure 4
.
6. On each
TP-310A
unit, connect the power.
