Your TP-202 UXGA Line Transceiver/DA
5
4
Your TP-202 UXGA Line Transceiver/DA
Figure 1
and
Table 1
define the
TP-202
:
Figure 1: TP-202 UXGA Line Transceiver/DA
Table 1: TP-202 UXGA Line Transceiver/DA Features
#
Feature
Function
1
12V DC
+12V DC connector for powering the unit
2
LINE IN RJ-45 Connector Connect
2
to the LINE OUT RJ-45 connector on the
transmitter
1
3
LINE OUT RJ-45 Connector Connect
2
to the LINE IN connector on an additional TP-202
4
EQ. Trimmer
Adjust
3
the cable compensation equalization level
5
LEVEL Trimmer
Adjust
3
the output signal level
6
XGA OUT 1 15-pin HD Connector
Connect to the first XGA acceptor
7
XGA OUT 2 15-pin HD Connector
Connect to the second XGA acceptor
8
ON LED
Illuminates when receiving power
1 For example, the PT-110, as
Figure 3
illustrates
2 Using a UTP CAT 5 cable with RJ-45 connectors at both ends (the PINOUT is defined in
Table 3
and
Figure 4
)
3 Insert a screwdriver into the small hole and carefully rotate it, to trim the appropriate level
