KRAMER: SIMPLE CREATIVE TECHNOLOGY
Getting Started
2
2.1
Quick Start
This quick start chart summarizes the basic setup and operation steps.
Step 1: Connect the input and the outputs
m
m
Set the polarity using the underside switches
Adjust the EQ. and LEVEL using the trimmers on the front panel
m
Set the polarity using the underside switches
m
Adjust the EQ. and LEVEL using the trimmers on the front panel
Step 2: Connect the power
Step 3: On the TP-202, if required:
1
1
2
2
3
3
3
4
4
4
Connect the input source to
the PT-110 transmitter
Connect the outputs: up to
two acceptors per unit
Connect the CAT 5 cable
between the transmitter
(PT-110) and the receiver
(TP-202)
Connect an additional
TP-202 via CAT 5 cable
Connect the input source to
the PT-110 transmitter
Connect the outputs: up to
two acceptors per unit
Connect the CAT 5 cable
between the transmitter
(PT-110) and the receiver
(TP-202)
Connect an additional
TP-202 via CAT 5 cable
Display 1
Display 4
Display 3
Long CAT 5 cable
TP-202
XGA
Line
Receiver/DA
12V DC
L
O
INE
UT
L
I
INE
N
XGA LineTransm
itter
PT
11
0
XGA
INPUT
LINE
OUTPUT
ON
Long CAT 5 cable
Computer Graphics
Source
VGA
Display 2
VGA
VGA
VGA
VGA
