KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting the TBUS-1
8
5.4 Inserting the TBUS-1 Through the Cut Out Opening
After installing the required devices and adjusting the Connecting Surface height,
carefully insert the unit into the prepared opening, as illustrated in Figure 5.
Figure 5: Inserting TBUS-1 into the Prepared Opening
5.5 Installing the Cables
To insert the pass through cables (for example, to connect a laptop) do the
following:
1. Remove the two screws attaching the split pass-through bracket.
2. Remove the split grommet.
3. Insert the cable through the rectangular opening.
4. Open the split grommet slightly and insert the required cables.
5. Place the split bracket around the grommet and position this assembly over the
Connecting Surface frame.
6. Place the two screws appropriately and tighten the split bracket together with
the grommet and inserted cables to the Connecting Surface.
7. Insert the self-locking ties through the tie holes to secure the cables to the
inside walls of the enclosure.
