![background image](http://html.mh-extra.com/html/kramer/rc-43t/rc-43t_user-manual_2002036009.webp)
6
RC-43T - Defining the RC-43T Remote Controller
Figure 2: RC-43T Remote Controller Rear View
#
Feature
Description
1
Mounting Holes
Attach the RC-43T to the wall mounting box with the
screws provided (see
Section
6.2
)
2
Front Panel
Cosmetic panel that covers the PC Board and houses the
removable buttons
3
PC Board Frame
Mounting panel that houses the PC Board
4
PC Board
5
SW7
K-NET
Termination Switch
Use to set the K-NET bus termination (see
Section
5.2
)
6
KNET 4-pin Captive-
screw Terminal Block
Connect to a master room controller or to another auxiliary
device (see
Section
5.1
).
Note
: The RC-43T is always
device ID 2 on the K-NET bus. This cannot be changed
7
PC Board Frame
Alignment Tongue
Align this tongue with the cutout in the front panel when
mounting the PC Board frame to the front panel
Содержание RC-43T
Страница 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL RC 43T Remote Controller P N 2900 300301 Rev 2 ...
Страница 2: ......
Страница 17: ......