10
RB-6 - Connecting the RB-6
3. Optional
—connect a PC via Ethernet over a LAN to the
RB-6
for remote
control.
6.2
Connecting to the RB-6 via Ethernet
You can connect the
RB-6
via Ethernet using a crossover cable (see
Section
6.2.1
) for direct connection to the PC, or a straight through cable (see
Section
6.2.2
) for connection via a network hub or network router.
After connecting the Ethernet port, you have to install and configure your Ethernet Port. For
detailed instructions, see the Ethernet Configuration Guide (Lantronix) in the technical support
section on our Web site
http://www.kramerelectronics.com
6.2.1
Connecting the Ethernet Port directly to a PC
You can connect the Ethernet port on the
RB-6
to the Ethernet port on your PC
via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the
factory default IP Address of the
RB-6
during the initial configuration
To configure your PC after connecting the Ethernet port:
1. Right-click the
My Network Places
icon on your desktop.
2. Select
Properties
.
3. Right-click
Local Area Connection Properties
.
4. Select
Properties
.
The
Local Area Connection Properties
window appears.
5. Select the
Internet Protocol (TCP/IP)
and click the
Properties
Button.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203