KRAMER: SIMPLE CREATIVE TECHNOLOGY
Configuring and Operating Your PIP-500
18
6. Press the button 14 times to change the letter N to a blank space, and then
press the button to continue to the next letter.
7. Press the button 15 times to change the letter N to 3, and then press the
button to continue to the next letter.
8. Press the or buttons to change the remaining characters to blank spaces.
9. Press ENTER to accept changes.
7.2 Displaying the Layers in the PIP Mode
To display a picture-in-picture on the screen, do the following:
1. Select an input.
2. Select the PIP mode and then size and position each layer as desired
1
.
3. Press an INPUT button to bring forward that input on the screen.
1 Only one channel can be sized to 1:1, the others should be smaller in size or OFF (see Table 6)
