Kramer PIP-4, Руководство пользователя, Страница: 24 / 34

Resetting the PIP-4 Parameters to Factory Defaults
21
7.1.11 Setting the IP Network Parameters
To set the IP network parameters:
1. Click Device > Device Details .
2. Under Connectivity , edit the required parameter(s).
3. Click Set Value .
A confirmation message appears.
4. Click OK .
The parameter is set.
5. Reboot the device.
7.1.12 Displaying the PIP-4 Software Version Number
To display the PIP-4 Software version number:
1. From the Menu bar, click About .
The About PIP-4 Controller window appears as shown in Figure 14 .
Figure 14: About PIP-4 Controller Window
2. Click OK to close the window.
8
Resetting the PIP-4 Parameters to Factory Defaults
For a list of the factory default parameters see Section ‎11 .
To reset all parameters to factory default values:
1. Disconnect the power from the device.
2. Press and hold the Reset button on the rear panel of the unit.
3. While holding the Reset button, reconnect the power to the device.
4. Wait until the video pane(s) are displayed. Release the Reset button.
The parameters are reset to factory default values.