12
KW-14T-IL/KW-14R-IL - Connecting the KW-14T-IL and KW-14R-IL
4. Press the Register button on the receiver to confirm.
The message “Adding <
transmitter name>
… and a progress bar is displayed
on the OSD while the registration process completes.
Note
: The registration process can take up to 60 seconds to complete. If the
process takes longer than this, power cycle both devices and then start the
registration process from the beginning.
When the registration process is complete, the message and progress bar
disappear from the display. The Link and Video LEDs light solid.
5. Repeat steps 1 to 4 to register up to three transmitters to a receiver.
5.2.2
Registering Using the IR Remote Control
Note
: The IR remote control must be pointed at the front panel of the receiver from
a distance of no more than 9m (30ft) and no more than 40° from center.
Note
: The OSD is best displayed when the resolution is set to 1080p.
To register a transmitter with a receiver with the IR remote control
:
1. Connect and apply power to the transmitter, input source, receiver, and
output acceptor.
2. Press the Add button on the IR remote control. The following message is
displayed on the OSD:
“Please activate registration on Transmitter unit”.
3. Press and hold the Register button on the transmitter until the following
message is displayed on the OSD:
“Adding <
transmitter name>
. Press OK to continue or EXIT to ca
ncel”.
4. Press the OK button on the IR remote control to confirm.
The message “Adding <
transmitter name>
… and a progress bar is displayed
on the OSD while the registration process is in progress.
Note
: The registration process can take up to 60 seconds to complete. If the
process takes longer than this, power cycle both devices and then start the
registration process from the beginning.
Содержание KW-14R-IL
Страница 2: ...KW 14T IL KW 14R IL Contents i...
Страница 3: ...ii KW 14T IL Contents...
Страница 34: ......