Kramer KT-107, Руководство пользователя

Страница: 11 / 41

Kramer Electronics Ltd.
KT-107, KT-107RB - Mounting the KT-107, KT-107RB 9
Mounting the KT-107, KT-107RB
The KT-107 can be placed on a table or mounted on a wall.
Always be careful when attaching or removing the Touch Panel from either mounts.
Mounting the KT-107 on a Table
When mounting KT-107 on a table:

You can mount KT-107 either in secure mode or portable mode.

In secure mode, KT-107 is attached to the table (or other surface)

In portable mode, KT-107 is placed without damaging the table, is not secured and
can be moved.

The cables connected to KT-107 can be hidden by connecting them under the table via
the cable pass-through opening (in secure mode) or they can be connected over the table,
thus remaining visible (for both mounting modes).
Preparing the Table for a Secure Mount
To mount KT-107 in portable mode, go to Setting KT-107 on the Tabletop Mount on
page 12 .
When mounting KT-107 on a table in secure mode, prepare the table as follows:

Drill a hole in the table to fit the M5x60 screw used for securing the tabletop mount to the
table.

Cut an opening in the table if you need to pass the cables from underneath.
The thickness of the table should be 76.2mm (3
”) or less.