![background image](http://html.mh-extra.com/html/kramer/kn-dsp100/kn-dsp100_user-manual_2002073021.webp)
Kramer Electronics Ltd.
KN-DSP100
– Processing Audio Streaming Signals
19
Plug-in
Function
Description
X-FDBK
Feedback
Suppressor
A feedback elimination plugin that identifies the precise
frequencies that cause feedback and cuts them, dramatically
shortening the setup time of monitors and PA speakers.
To cut out the microphone feedback before it is live:
a. Set the microphone as loud as possible before the system
begins to feedback.
b. Walk around the area where the speaker will be talking.
c. Click
SETUP
in the different areas to activate the
X-feedback detection engine. The button turns red.
The plug-in turns off automatically after 1 minute and if
microphone feedback is detected, the filter is added with
appropriate Q and amplitude to stop the feedback.
d. Click
SETUP
as many times as needed to suppress
feedback.
Click
RESET
to clear all the filters.
www.waves.com/1lib/pdf/plugins/x-
C1
C1 Compressor
Compressor plugin with sidechain, compression, expansion,
gating, and equalization. C1 is a true production workhorse,
featuring three independent modules which can be used
separately or combined for maximum flexibility.
For further details, see
www.waves.com/plugins/c1-compressor
GEQ
30 Band Equalizer
30-band graphic equalizer plugin with classic Mono and stereo
components.
For further details, see
www.waves.com/1lib/pdf/plugins/geq-
L1
Ultramaximizer
Peak Limiter
Advanced level maximizer, look-ahead peak limiter, and high-
resolution re-quantizer.
For further details, see
www.waves.com/1lib/pdf/plugins/l1-ultramaximizer.pdf
eMoGenerator
Signal Generator
Generates one of three selectable signal types when
ON
:
•
SINE
Wave: for sweeping through entire frequency ranges
or even for tuning instruments to middle A.
•
WHITE
Noise: for SPL measurements.
•
PINK
Noise: for testing and tuning the live sound-system.
For further details, see
www.waves.com/1lib/pdf/plugins/emo-generator.pdf
4. Use the slide to set the volume or type the audio level below the slide.