Kramer KDS-EN2R, Руководство пользователя

Страница: 16 / 35

KDS-EN2T, KDS-EN2R - Connecting the KDS-EN2T/KDS-EN2R 13
5.2 Multicasting Setup
In the multicasting setup, one host (transmitter) and multiple clients (receivers)
share the same group ID (see
Section 4.4 and 6.2 Section
The multicast addresses used range from 255.0.0.XXX to 255.0.1.XXX, where
XXX stands for the group ID as set by the DIP switch (see
), so that all of the
clients decode the same stream (encoded by the host), without creating additional
load on the network.
Section 4.4
The example illustrated in
).
Figure 5 shows a multicast setup including one host
connected to several clients sharing the same group ID. The host transmits the
HDMI and RS-232 content to all the clients that share its group ID; other clients
that are connected to the same Ethernet switch will not receive this content. Other
hosts, with different group IDs can co-exist in the system (for example, a video
wall setup, see
Section 5.3 ).