Kramer Electronics Ltd.
KDS-8-MNGR
– Using Embedded Web Pages
47
Removing an Encoder
Only disconnected encoders can be removed.
To remove an encoder from the list:
1. In the Menu tabs, select
Transmitter
. The Transmitter page appears.
2. Click
Remove
. The Remove window appears.
3. Select an encoder from the list.
4. Click
Confirm
.
The selected encoder is removed from the list.
Configuring Receivers
KDS-8-MNGR
enables viewing and configuring detected decoder details.
Previously detected decoders that are not currently detected, are identified by a disconnected
icon (
) and cannot be used for routing.
Receiver tab enables performing the following actions:
•
Viewing and Configuring Decoder Settings
•
Viewing and Configuring Decoder Settings
To view and configure decoder settings:
1. In the Menu tabs, select
Receiver
. The Receiver page appears.
Figure 39: Receiver Page