![background image](http://html1.mh-extra.com/html/kramer/k-net-rc-53d/k-net-rc-53d_user-manual_2000844008.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the RC-53D Faceplate, Button Caps and Labels
6
6
Installing the RC-53D Faceplate, Button Caps and Labels
This section describes how to install the faceplate, button caps and labels.
illustrates a sample button label sheet.
Figure 4: Sample Button Label Sheet
To install the faceplate, button caps and labels:
1. Remove the required labels from the supplied button label sheet.
2. Hold the button cap so that it is oriented as shown in
“wings” on the left and right sides, and insert the label inside the cap.
3. Repeat for all six caps.
4. Retaining the orientation, place the six button caps on the buttons of the
RC-53D
.
5. Remove the protective foils from both sides of the Perspex windows.
6. Place the faceplate on the
RC-53D
so that the four screw mounting holes are
aligned.
7. Insert the four mounting screws and tighten with a screwdriver.
8. Install the volume control knob.
Figure 5: Button Cap Orientation