Using the Remote Control Transmitters (IR-1 / IR-1-01)
13
7.3.2.2
Recalling a Setup using the IR-1-01
To recall a setup (for example, setup # 7) using the IR-1-01 for a series 16x16
matrix switcher that is allocated to Group 20, press:
•
<SHIFT> <RCL> <# 0/10> <# 7>
7.4 Controlling the VP-25xl via the IR-1 / IR-1-01
You can control the VP-25xl 4x1 Presentation Switcher / Scaler using the
IR-1 and/or IR-1-01 to do the following:
•
Adjust the volume (see section
7.4.1)
•
Control the Scaler LEDs and buttons (see section
7.4.2)
7.4.1
Adjusting the Volume of the VP-25xl
You can increase and/or decrease the volume of the VP-25xl using the IR-1
and the IR-1-01 remote control transmitters.
7.4.1.1
Increasing the Volume of the VP-25xl
To increase the volume, do the following:
1. Point the remote control transmitter at the remote receiver and press the
SHIFT key.
2. Press the VOL+ key.
3. Press the key 1 continuously until the volume increase is satisfactory.
7.4.1.2
Decreasing the Volume of the VP-25xl
To decrease the volume, do the following:
1. Point the remote control transmitter at the remote receiver and press the
SHIFT key.
2. Press the VOL- key.
3. Press the key 1 continuously until the volume decrease is satisfactory.
