KRAMER: SIMPLE CREATIVE TECHNOLOGY
Using the Remote Control Transmitters (IR-1 / IR-1-01)
10
7.1.1.2
Using the <-> Single Digit Mode to Select 10 via the <0/10> Key
The <-> single digit mode is accessed by pressing <SHIFT> <->
1
. This mode
accepts single digit numbers.
7.1.1.3
Using the <--> Double Digit Mode to Select 0 via the <0/10> Key
The <--> double digit mode is accessed by pressing <SHIFT> <-->
1
. This
mode accepts double digit numbers.
7.1.2 Timeout
By design, every keypad operation is subject to a 10 second timeout. Failure
to fully execute an action within 10 seconds will necessitate restarting that
action.
7.1.3 Operational
Modes
Choose the operational mode, “VID”: video (the default), “AUD”: audio or
“A-F-V”: audio-follow-video, by pressing the appropriate key
2
.
7.1.4
Transmitting Data using the Take Key
To transmit data using the Take key, do the following:
1. Point the remote control transmitter at the remote receiver and press the
TAKE key. The TRANS LED lights.
2. Prepare the set of codes for switching (see section
7.2).
3. Press the TAKE key again. The TRANS LED lights.
The data transmits to the unit(s).
1 See the example in section
7.2.2
2 See items 7, 8 and 9 in Figure 1
