Kramer Galil 6-I, Руководство пользователя

Страница: 8 / 16

Galil 6-I - Installing the Galil 6-I 2-Way In-Wall Speakers 5
5
5 Installing the Galil 6-I 2-Way In-Wall
Speakers
This section explains how to install the 2-Way In-Wall Speakers, that is:

Choosing the best place to locate your speakers (see Section
‎5.1
)

Cutting an opening in the wall or ceiling (see Section
‎5.2
)

Installing the speakers (see Section
‎5.3
)

Coverage area in case of ceiling installation (see Section
‎5.4
)

Painting the speakers (see Section
‎5.5
)
5.1 Choosing the Best Location
Locate the speakers in the main listening area placing the tweeters as close to ear
level as possible and at the same height. Locate the left and right speakers at
least 1.8m (6 feet) apart and 1m (3.3 feet) away from the room corners. Once you
have the location set, you can install them.
Before doing so, be sure that:

The desired location is free of obstructions, such as electrical piping, AC
ducts or water lines, and so on

The thickness of the mounting surface is between 0.95cm and 3.2cm
(0.375" and 1.25
”)

There is at least a space of 7.5 cm (2.9") behind the mounting surface for
the speakers

The rear side of the speaker is not blocked by wall studs or other objects
5.2 Cutting an Opening
Before installing the Galil 6-I you will need to cut an opening in the wall or the
ceiling tile. To do so:
1. Remove the rectangle in the supplied template and tape it to the wall in the
correct location.