Kramer FC-54P, Быстрый старт, Страница: 4 / 4

Step 5: Connect the power
Connect the PoE or a USB power source and/or a 5V DC power adapter to the FC-54P and plug it into the mains electricity.
Step 6: Configure and operate the FC-54P
Note : The FC-54P is shipped from the factory with DHCP enabled and a random IP address. To connect the FC-54P on first
installation, you must identify what IP address has been automatically assigned to the FC-54P . To discover the IP address of
FC-54P , use K-LAN Configurator , available for download from our website at www.kramerav.com .
To reset the device to its factory default settings :
1. Turn off the power to the device.
2. Press and hold the Reset button on the rear panel.
3. Turn on the power to the device while holding down
the Reset button for a few seconds.
4. Release the button.
The device is reset to the factory default settings.
To browse the FC-54P Web UI (User Interface) on
taking the device out of the box:
Use the default host name: FC-54P-xxxx , where xxxx are
the last four digits of the serial number of the device .
To configure and operate the FC-54P :
1. Using the device Web UI, configure the control gateway:
• Set DHCP or assign a static IP address
• Associate IP port(s) with the relevant port(s)
• Configure the relevant port parameters
2. Configure IP client connection port(s) on a Kramer control or
any other control software application.
3. Set the control application to use the control gateway ports for
sending and receiving control communication over the IP
connections.