![background image](http://html1.mh-extra.com/html/kramer/fc-54p/fc-54p_quick-start-manual_2001010003.webp)
Step 3: Install the FC-54P
You can attach the rubber feet and place on a table or mount the
FC-54P
in a rack (using an optional
RK-T2B
rack mount).
You can also mount this Kramer Mega
TOOLS™ next to a USB power source behind an AV device, in room ceiling area, on a
desk top, wall or similar area. Fasten a bracket on each side of the device using the two M3x8 screws (supplied). Use the
flat-head screws (supplied) to fix the TOOLS to the mounting surface or enable it to slide in place.
Step 4: Connect the inputs and outputs
Always switch OFF the power on each device before connecting it to your
FC-54P
. For best results, we recommend that you always
use Kramer high-performance cables to connect controlled equipment to the
FC-54P
.